Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-7e9ef531-d367-451c-8088-38601a33b62c

Czasopismo

Production Engineering Archives

Tytuł artykułu

Morphology of intermetallic phases in Al-Si cast alloys and their fracture behaviour

Autorzy Hurtalova, L.  Tillova, E.  Chalupova, M.  Belan, J. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN Applications of Al-Si cast alloys in recent years have increased especially in the automotive industry (dynamic exposed cast, engine parts, cylinder heads, pistons and so on). Controlling the microstructure of secondary aluminium cast alloys is very important, because these alloys contain more additional elements that form various intermetallic phases in the structure. Therefore, the contribution is dealing with the valuation type of intermetallic phases and their identification with using optical and scanning microscopy. Some of the intermetallic phases could be identified on the basis of morphology but some of them must be identified according EDX analysis. The properties of aluminium alloy are affected by morphology of intermetallic phases and therefore it is necessary to study morphology and its fracture behaviour. The present work shows morphology and typical fracture behaviour as the most common intermetallic phases forming in Al-Si alloys.
Słowa kluczowe
PL morfologia faz międzymetalicznych   stopy Al-Si   zachowanie pęknięć faz międzymetalicznych  
EN morphology of intermetallic phases   Al-Si alloys   fracture behaviour of intermetallic phases  
Wydawca Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
Czasopismo Production Engineering Archives
Rocznik 2015
Tom Vol. 6, No. 1
Strony 2--5
Opis fizyczny Bibliogr. 17 poz., rys.
Twórcy
autor Hurtalova, L.
  • University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Univerzitná 8215/1, 010 26 Žilina, Slovakia, phone: 00421/415132626, lenka.hurtalova@fstroj.uniza.sk
autor Tillova, E.
  • University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Univerzitná 8215/1, 010 26 Žilina, Slovakia, phone: 00421/415132626, eva.tillova@fstroj.uniza.sk
autor Chalupova, M.
  • University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Univerzitná 8215/1, 010 26 Žilina, Slovakia, phone: 00421/415132626, maria.chalupova@fstroj.uniza.sk
autor Belan, J.
  • University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Univerzitná 8215/1, 010 26 Žilina, Slovakia, phone: 00421/415132626, juraj.belan@fstroj.uniza.sk
Bibliografia
1. Bäckerud L., et al. 1986: Solidification Characteristics of Aluminum Alloys, „Universitetsforlaget“, Oslo 1 226.
2. Bäckerud L., et al. 1992: Solidification Characteristics of Aluminum Alloys, „The American Foundry Society“ 2 226.
3. Biswa A., et al. 2014: Compositional evolution of Q-phase precipitates in an aluminum alloy. „Acta Materialia“ 75 322–336.
4. Cáceres C. H., et al. 1999: The effect of Cu con-tent on the level of microporosity in Al-Si-Cu-Mg casting alloys. „Scripta Materialia” 40/5 631-637.
5. Farahanya S., et al. 2013: Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis. „Thermochimica Acta” 559 59.
6. Matvija M., et al. 2012: The effect of ecap and subsequent post-ecap annealing on the micr-structure and mechanical properties of AlSi7Mg0.3 alloy. „Acta Metallurgica Slovaca” 18/1 4.
7. Miller W. S., et al. 2000: Recent development in aluminium alloys for the automotive industry. „Materials Science and Engineering” A 280 37.
8. Xing M., et al. 2013: Dynamic Fracture Beha-iors of Selected Aluminum Alloys Under Three-point Bending. „Defence Technology” 9/4 193–200.
9. Rios C.T., et al. 2003: Intermetallic compounds in the Al-Si-Cu systém. „Acta microscopia” 12 77-82.
10. Seifeddine S. 2007: The influence of Fe on the microstructure and mechanical properties of cast Al-Si alloys. “Literature review - Vilmer project”. Jönköping University Sweden.
11. Suwanpinij P., et al. 2003: Influence of Copper and Iron on Solidification Characteristics of 356 and 380-Type Aluminum Alloys. „Materials Transactions“ 44/5 845 - 852.
12. Taylor J. A. 2004: The effect of iron in Al-Si casting alloys. “35th Australian Foundry Institute National Conference Adelaide South Australia” 148.
13. Tillová E., et al. 2010: Evolution of the Fe-rich phases in recycled AlSi9Cu3 cast alloy during solution treatment. „Communications - Scientific letters of the university of Žilina” 12/4 95-101.
14. Timpel M. and et al. 2012: The role of strontium in modifying aluminium–silicon alloys. “Acta Materialia” 60 3920.
15. Tokar M., et al. 2014: The effect of strontium and antimony on the mechanical properties of Al-Si alloys. „Mateials Science and Engineering“ 39/1 69.
16. Ulewicz, R. 2014: Practical application of quality tools in the cast iron forundry. „Manufacturing technology“ 14/1 104-111.
17. Xiufang B., et al. 2001: Liquid structure of Al–12.5% Si alloy modified by antimony. „Materials Characterization” 46/1 25-29.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-7e9ef531-d367-451c-8088-38601a33b62c
Identyfikatory