Archives of Metallurgy and Materials - Tom Vol. 64, iss. 3 (2019) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 64, iss. 3

Czasopismo

Archives of Metallurgy and Materials

Wydawca

Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science

Rocznik

2019

Identyfikatory

Zawartość wolumenu

Vol. 64, iss. 3
- artykuł: Calibration of Visco-Hyperelastic Model for Tensile Behavior of Porcine Skin (Shin Heonseop, Han Doyeon, Kim Sanghoon, Rhim Sungsoo), s. 819--822
- artykuł: Analysis and Verification of Physical Properties of an AISI 4140 Steel by Vickers Indentation Analysis According to the Presence of Residual Stresses (Jung Changho, Lee Moon G., Jeon Yongho), s. 823--827
- artykuł: Pre-Treatment Characteristics for LCD Glass Recycling: Dismantling, Crushing, and Separation (Kim Seyul, Kang Yubin, Kang Leeseung, Hong Hyun Seon, Lee Chan Gi), s. 829--834
- artykuł: Change of Easy Magnetization Axis and Frequency of Reflection Loss by Co-Ti Substitution in Barium Ferrite (Yang Su-Won, Kim Jeong-Gon, Jeong Kwang-Pil, Shim Han-Ul, Cho Seong-Il, Kim Min-Young), s. 835--839
- artykuł: Friction and Wear Behavior of Direct Metal Deposition on SUH3 (Choi Byungjoo, Cho In-Sik, Jung Do-Hyun, Lee Moon G., Jeon Yongho), s. 841--844
- artykuł: Application of Hollow Fiber Supported Liquid Membrane for Extraction of Cobalt by Cyanex 272 (Swain Basudev, Lee Jae-Chun, Kim Dae-Guen, Lee Chan Gi), s. 845--850
- artykuł: Fabrication of Agar-Silica Aerogel Nanocomposite Films (Lee Min-Jin, Jung Hyun-Ah, Lee Kyong-Jin, Hwang Haejin), s. 851--855
- artykuł: Effect of Trace Elements (Co, Cr) on the Microstructure and Physical Properties of Al-Si-Cu-Mg-Fe Extruded Alloy (Ahn S. S., Sharief P., Lee C. H., Son H. T., Kim Y. H., Kim Y. C., Hong S., Hong S. J.), s. 857--862
- artykuł: Influence of Carbon Content on Austenite Stability and Strain-induced Transformation of Nanocrystalline FeNiC Alloy by Spark Plasma Sintering (Oh Seung-Jin, Kim Byoung-Cheol, Suh Man-Chul, Shon In-Jin, Lee Seok-Jae), s. 863--867
- artykuł: Grain Boundary Wetting and Material Performance in an Industrial EZ33A Mg Cast Alloy (Straumal A. B., Tsoy K. V., Mazilkin I. A.., Nekrasov A. N., Bryła K.), s. 869--873
- artykuł: Microstructure and Mechanical Properties of as Cast Al-6.5Mg-1.5Zn-0.5Fe Alloy Followed by Cold Rolling and Subsequent Annealing (Lee Seong-Hee), s. 875--878
- artykuł: Effect of Zr and Nb on the Electrical and Magnetic Properties of the Fe-Zr-Nb-B-Cu Alloy (Noh Junghyun, Park Seungyeon, Hwang Haejin, Lim Kyoungmook), s. 879--882
- artykuł: Densification and Mechanical Properties of 439L Steel Composites Blended with Fifteen Micron-Size Silicon Carbide Particles (Lee Sang Woo, Shin Hyunho, Rhee Kyong-Yop), s. 883--888
- artykuł: Effect of Surface Treatments on Cast-Bonding Characteristics of Steel-Aluminum Hybrid Composite Materials (Kim Hyo-Jung, Kim Tae Hyeong, Shin Je Sik, Park Seung Yeon, Hyun Soongkeun, Lim Kyoung Mook), s. 889--892
- artykuł: Phase Structure and Magnetic Properties of Intermetallic Cu-Ni Alloy Nanopowders Synthesized by the Electrical Explosion of Wire (Nguyen Minh-Thuyet, Kim Jin-Chun), s. 893--898
- artykuł: Electrorefining of Indium Metal From Impure In-Sn Alloy in Fluoride Molten Salt (Lee Hyun-Gyu, Choi Sang-Hoon, Sim Jae-Jin, Lim Jae-Hong, Hyun Soong-Keun, Lee Jong-Hyeon, Park Kyoung-Tae), s. 899--905
- artykuł: Effect of Process Variables on Friction Stirred Microstructure and Surface Hardness of AZ31 Magnesium Alloy (Kim Jae-Yeon, Hwang Jung-Woo, Lee Seung-Mi, Hyun Chang-Young, Park Ik-Keun, Byeon Jai-Won), s. 907--911
- artykuł: Thermal Degradation Behavior of Ag Nanowire-Coated Transparent Conductive Film (Kim Jae-Yeon, Kim Hye-Young, Kim Hyun-Su, Yoo Ki-Tae, Yang Won-Jon, Byeon Jai-Won), s. 913--916
- artykuł: Effect of Powder Shape and Sintering Temperature on the Preparation of Ni-Based Porous Metal (Yi Yu-Jeong, Lee Min-Jeong, Kim Hyeon-Ju, Yang Sangsun, Park Man-Ho, Kim Byoung-Kee, Yun Jung-Yeul), s. 917--920
- artykuł: Microstructures and Mechanical Properties of ODS Ferritic Stainless Steels for High Temperature Service Applications (Noh Sanghoon, Kang Suk Hoon, Kim Tae Kyu), s. 921--924
- artykuł: Reliability Examinations of SAC Lead Free Solder Material (Koncz-Horváth D., Gergely G., Gyökér Z., Gácsi Z.), s. 925--930
- artykuł: Correlation between Microstructure and Exothermic Reaction Kinetics of Al-CuO Thermite Nanocomposite Powders Fabricated by Cryomilling (Oh Minseok, Kim Kwanil, Ahn Byungmin), s. 931--934
- artykuł: Fabrication of 4N5 Grade Tantalum Wire from Tantalum Scrap by EBM and Drawing (Yu Ji-Won, Choi Sang-Hoon, Sim Jae-Jin, Lim Jae-Hong, Seo Kyoung-Deok, Hyun Soong-Keon, Kim Tae-Youb, Gu Bon-Woo, Park Kyoung-Tae), s. 935--941
- artykuł: Comparative Study on the Electrical and Mechanical Characteristics of Ni-30wt%Co and Cu-2wt%Be Alloy for Development of Semiconductor Test Probe Pin (Park Jin-Young, Kim Young-Choon, Kim Jae-Gyun), s. 943--947
- artykuł: Effect of Process Control Agent on the Microstructure of Ni-Based ODS Superalloy Produced by Mechanical Alloying and Sintering (Han Ju-Yeon, Kang Hyunji, Oh Sung-Tag), s. 949--952
- artykuł: Microstructural Characterization of U-10wt.%Zr Fuel Slugs Containing Rare-Earth Elements Prepared by Modified Injection Casting (Lee Sang-Hun, Kim Ki-Hwan, Kuk Seoung-Woo, Park Jeong-Yong, Choi Ji-Hoon), s. 953--957
- artykuł: Properties of Pure Ti Implants Fabricated by Additive Manufacturing (Kim Dong-Jin, Kim Hyung-Giun, Kim Ji-Sun, Song Kuk-Hyun), s. 959--962
- artykuł: Effect of Pd-P Layer on the Bonding Strength of Bi-Te Thermoelectric Elements (Bae Sung Hwa, Han Se Hun, Son Injoon, Kim Kyung Tae), s. 963--968
- artykuł: Morphology and Structure of the Erbium Stabilized Bismuth Oxide Thin Films Deposited by PLD Technique (Kąc S., Szwachta G., Cieniek Ł., Moskalewicz T.), s. 969--974
- artykuł: The Influence of Tool Geometry for Refill Friction Stir Spot Welding (RFSSW) on Weld Properties During Joining Thin Sheets of Aluminum Alloys (Łogin W., Śliwa R. E., Ostrowski R., Andres J.), s. 975--981
- artykuł: Synthesis and Magnetic Properties of Fe Nanowire Arrays Electrodeposited in Self-Ordered Alumina Membrane (Dobosz I., Gumowska W., Czapkiewicz M.), s. 983--990
- artykuł: Influence of Perforation of the Inner Layer on the Properties of Three-Layer Welded Materials Ordered Alumina Membrane (Kuczek Ł., Muzykiewicz W., Mroczkowski M., Wiktorowicz J.), s. 991--996
- artykuł: The Influence of Plastic Forming Processes on the Dissolution Rate of Biocompatible Mg Alloys (Boczkal S., Karaś M., Korczak P., Kapinos D., Koprowski P., Szymański W., Wroński S.), s. 997--1004
- artykuł: An influence of Titanium Alloy Ti10V2Fe3Al Microstructure on the Electrodischarge Process Efficiency (Żyra A., Bogucki R., Skoczypiec S.), s. 1005--1010
- artykuł: Residual Stresses of AlSi10Mg Fabricated by Selective Laser Melting (SLM) (Karolus M., Maszybrocka J., Stwora A., Skrabalak G.), s. 1011--1016
- artykuł: Influence of Milling Time on Formation of NiTi Alloy Produced by High-Energy Ball Milling (Salwa P., Goryczka T.), s. 1017--1022
- artykuł: Electrical Conductivity and Morphology Study of Polyaniline Powder Synthesised with Various Doping Ions (Golba S., Popczyk M., Miga S., Jurek-Suliga J., Zubko M.), s. 1023--1028
- artykuł: Phase Composition of Urban Soils by X-Ray Diffraction and Mössbauer Spectroscopy Analysis (Kierlik P., Hanc-Kuczkowska A., Męczyński R., Matuła I., Dercz G.), s. 1029--1032
- artykuł: Corrosion Properties of Ca65-xMg17.5Zn17.5+x (x = 0, 2.5, 5) Alloys (Babilas R., Wojciechowski P., Bajorek A., Sakiewicz P., Cesarz-Andraczke K.), s. 1033--1040
- artykuł: Application of Two Advanced Vision Methods Based on Structural and Surface Analyses to Detect Defects in the Erichsen Cupping Test (Jasiński C., Świłło S., Kocańda A.), s. 1041--1049
- artykuł: Friction Weldability of UFG 316L Stainless Steel (Skowrońska B., Chmielewski T., Pachla W., Kulczyk M., Skiba J., Presz W.), s. 1051--1058
- artykuł: Fuzzy Logic Enhancement of Material Strain Hardening Data Obtained in the Heyer's Test (Skrzat A., Wójcik M., Bąk Ł.), s. 1059--1065
- artykuł: Groove Rolling Process of Mg/Al Bimetallic Bars (Mróz S., Stefanik A., Szota P.), s. 1067--1072
- artykuł: Development of an Approximation Model of Selected Properties of Model Materials Used for Simulations of Bulk Metal Plastic Forming Processes Using Induction of Decision Trees (Hawryluk M., Wilk-Kołodziejczyk D., Regulski K., Głowacki M.), s. 1073--1085
- artykuł: Effect of Relative Thickness Reduction and Heat Treatment on AMS 5596 Sheet Mechanical Properties After Flow Forming (Kut S., Maj P., Mrugała T.), s. 1087--1094
- artykuł: Application of Thermo-Bimaterial Effect in Designing of Snap-Fit Joints (Golewski P., Sadowski T.), s. 1095--1100
- artykuł: Effect of Filter Thickness on Reoxidation and Mechanical Properties of Aluminium Alloy AlSi7Mg0.3 (Bruna M., Remišová A., Sládek A.), s. 1100--1106
- artykuł: Impact of Zirconium on the Structural and Mechanical Properties of Commercial AlSi10MgCu Alloys (Hajduch P., Djurdjevic M. B., Bolibruchová D., Simicevic Z.), s. 1107--1110
- artykuł: The Evaluation of the Wear Mechanism of High-Carbon Hardfacing Layers (Winczek J., Gucwa M., Mičian M., Koňár R., Parzych S.), s. 1111--1115
- artykuł: Identification of Lack of Fusion and Incomplete Penetration in Butt Weld Joint by Ultrasonic Phased Array Method and X-Ray Method (Koňár R., Mičian M., Boháčik M., Gucwa M.), s. 1117--1124
- artykuł: Microstructure and Properties of Magnesium Alloy AZ61 After Extrusion with KoBo Method (Bednarczyk I.), s. 1125--1130
- artykuł: The influence of Die Shape and Back Tension Force on its Wear in the Process of Wire Drawing (Nowotyńska I., Kut S.), s. 1131--1137
- artykuł: Comparison of the Stress Relaxation of Biodegradable Surgical Threads Made of Mg and Zn Alloys and Some Commercial Synthetic Materials (Milenin A., Kustra P., Wróbel M., Paćko M., Byrska-Wójcik D.), s. 1139--1143
- artykuł: Selected Aspects of Manufacturing of Aluminium Sponge (Stręk A. M., Lipowska B., Wańczyk K.), s. 1145--1150
- artykuł: Mechanical Behaviour of Nanostructured Bainitic Steel Under High Strain Rate Shear and Compression Loading (Marcisz J., Janiszewski J.), s. 1151--1162
- artykuł: Computational Intelligence for Analysing the Mechanical Properties of AA 2219 - (B4C + h-BN) Hybrid Nano Composites Processed by Ultrasound Assisted Casting (Radha P., Selvakumar N., Harichandran R.), s. 1163--1173
- artykuł: Practical Approach to Determining Dynamic Recrystallization Parameters Using Finite Element Optimization of Backward Extrusion Process (Irani Missam, Joun Mansoo), s. 1175--1182
- artykuł: Dependence of Room Temperature Tensile Properties on Volume Fraction of Discontinuous Precipitates in Cast AZ91 Magnesium Alloy (Jun Joong-Hwan), s. 1183--1186
- artykuł: Development and Modelling of a Novel Process of Manufacturing Cylindrical Products with a Variable Longitudinal-Section Stub Pipe (Michalczyk J., Wiewiórowska S., Muskalski Z.), s. 1187--1193
- artykuł: Effects of V-Ti on Dynamic Recrystallization Behavior and Hot Deformation Activation Energy of 30MSV6 Micro-alloyed Steel (Tavaei K., Meysami A.), s. 1195--1200

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.