PL
|
EN
Szukaj
Przeglądaj
Pomoc
O bazie
test
Preferencje
Polski
English
Język
Widoczny
[Schowaj]
Abstrakt
10
20
50
100
Liczba wyników
Tom - szczegóły
Adres strony
Kopiuj
Tytuł artykułu
Vol. 59, iss. 2
Czasopismo
Archives of Metallurgy and Materials
Wydawca
Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Rocznik
2014
Identyfikatory
Zawartość wolumenu
Vol. 59, iss. 2
artykuł:
Effect of Magnesium Addition on Properties of Al-Based Composite Reinforced with Fine NiO Particles
(
Zygmunt-Kiper M.
,
Błaż L.
,
Sugamata M.
), s. 431--435
artykuł:
Materials Stress Diagnostics by X-Ray and Acoustic Techniques
(
Bonarski J.T.
,
Tarkowski L.
,
Pawlak S.
,
Rakowska A.
,
Major Ł.
), s. 437--441
artykuł:
Numerical Modelling of Stress/Strain Field Arising in Diamond-Impregnated Cobalt
(
Borowiecka-Jamrozek J.
,
Lachowski J.
), s. 443--446
artykuł:
Comparison of High Temperature Corrosion Resistance in Gaseous Environment of Alloys based on Intermetallic Phase Matrix Fe40Al5CrZrb And Steel X12CrCoNi2120
(
Cebulski J.
,
Fornalczyk A.
,
Pasek D.
), s. 447--450
artykuł:
Application of the Autocorrelation Function and Fractal Geometry Methods for Analysis of MFM Images
(
Bramowicz M.
,
Kulesza S.
,
Czaja P.
,
Maziarz W.
), s. 451--457
artykuł:
Thin Wall Ductile Iron Castings as Substitutes for Aluminium Alloy Castings
(
Fraś E.
,
Górny M.
,
Lopez H.
), s. 459--465
artykuł:
The Prediction of Surface Temperature in Drilling of Ti6Al4V
(
Işik B.
,
Kentli A.
), s. 467--471
artykuł:
Structure and Mechanical Properties of AlMg4.5 and AlMg4.5Mn Wires Extruded by Kobo Method
(
Jaskowski M.
,
Pieła K.
,
Błaż L.
), s. 473--479
artykuł:
Diversification of Phase Composition of Metallurgical Wastes after the Production of Cast Iron and Cast Steel
(
Jonczy I.
), s. 481--485
artykuł:
Modelling Liquid Steel Motion Caused by Electromagnetic Stirring in Continuous Casting Steel Process
(
Rywotycki M.
,
Malinowski Z.
,
Giełżecki J.
,
Gołdasz A.
), s. 487--492
artykuł:
Interaction of Non-Metallic Inclusion Particles with Advancing Solidification Front
(
Kalisz D.
), s. 493--500
artykuł:
Progress in Fabrication Technology of Silver-Based Contact Materials with Particular Account of the Ag-Re and Ag-SnO2Bi2O3 Composites
(
Księżarek S.
,
Woch M.
,
Kołacz D.
,
Kamińska M.
,
Borkowski P.
,
Walczuk E.
), s. 501--508
artykuł:
The Synthesis of Stable Platinum Nanoparticles in the Microreactor
(
Luty-Błocho M.
,
Wojnicki M.
,
Grzonka J.
,
Kurzydłowski K.J.
), s. 509--512
artykuł:
Short-Time Ageing of MS350 Maraging Steel with and Without Plastic Deformation
(
Marcisz J.
,
Stępień J.
), s. 513--520
artykuł:
Experimental and Fe Analysis of Aluminium Alloy Plastic Flow in the Forward Microextrusion Processes
(
Piwnik J.
,
Mogielnicki K.
), s. 521--525
artykuł:
Selected Problems from the High-Carbon Steel Wire Drawing Theory and Technology
(
Muskalski Z.
), s. 527--535
artykuł:
Mechanical and Structural Behavior of Copper Subjected to the Flow Forming Process
(
Pawlicki M.
,
Bochniak W.
), s. 537--543
artykuł:
The Effect of Liquid Aluminium on the Corrosion of Carbonaceous Materials
(
Pietrzyk S.
,
Palimąka P.
,
Gębarowski W.
), s. 545--550
artykuł:
Computer Aided Design of Wires Extrusion from Biocompatible Mg-Ca Magnesium Alloy
(
Milenin A.
,
Gzyl M.
,
Rec T.
,
Płonka B.
), s. 551--556
artykuł:
Analysis of Platinum Content in Used Auto Catalytic Converter Carriers and the Possibility of its Recovery
(
Saternus M.
,
Fornalczyk A.
,
Cebulski J.
), s. 557--564
artykuł:
Electrodeposition of Zirconium from DMSO Solution
(
Simka W.
,
Majewski D.
,
Nawrat G.
,
Krząkała A.
,
Nieużyła Ł.
,
Michalska J.
), s. 565--568
artykuł:
Application of Fast Fourier Transform (FFT) in the Analysis of a Welding Current Instantaneous Values Waveforms during Welding with a Covered Electrode
(
Słania J.
,
Ślązak B.
,
Fidali M.
), s. 569--573
artykuł:
The Microstructure and Properties of Low-Carbon PM Mn-Cr-Mo Steels Sintered under Different Conditions
(
Sułowski M.
,
Ciaś A.
,
Pieczonka T.
), s. 575--580
artykuł:
Acicular Ferrite in Micro Welding Technologies
(
Węgrzyn T.
,
Piwnik J.
,
Hadryś D.
), s. 581--583
artykuł:
Three Dimensional Analysis of Asymmetric Rolling with Flat and Inclined Entry
(
Wroński S.
,
Wierzbanowski K.
,
Wroński M.
,
Bacroix B.
), s. 585--591
artykuł:
Finite Element Modelling of the Residual Stresses Induced in Thermally Deposited Coatings
(
Zimmerman J.
), s. 593--599
artykuł:
Thermodynamic Description of Ternary Fe-B-X Systems. Part 1: Fe-B-Cr
(
Miettinen J.
,
Vassilev G.
), s. 601--607
artykuł:
Thermodynamic Description Of Ternary Fe-B-X Systems. Part 2: Fe-B-Ni
(
Miettinen J.
,
Vassilev G.
), s. 609--614
artykuł:
Tribological Properties of Copper-Based Composites with Lubricating Phase Particles
(
Juszczyk B.
,
Kulasa J.
,
Malara S.
,
Czepelak M.
,
Malec W.
,
Cwolek B.
,
Wierzbicki Ł.
), s. 615--620
artykuł:
Oxidation Resistance of Alcrn Coating Deposited on Ti-46Al-7Nb-0.7Cr-0.1Si-0.2Ni Alloy
(
Małecka J.
), s. 621--627
artykuł:
Root Canal System Analysis with a Group of First Permanent Molars of Upper and Lower Jaw
(
Mroczek K.
,
Szlązak K.
,
Jodkowska E.
,
Święszkowski W.
,
Kurzydłowski K.J.
), s. 629--632
artykuł:
Comparative Characteristics of the AlZr Alloy Materials Electrical and Mechanical Properties
(
Knych T.
,
Piwowarska-Uliasz M.
,
Uliasz P.
,
Wiecheć J.
), s. 633--639
artykuł:
Effect of Rare-Earth Metals Addition on Microstructure and Properties of Selected Copper Alloys
(
Rdzawski Z.
,
Głuchowski W.
,
Stobrawa J.
,
Sobota J.
), s. 641--648
artykuł:
Mechanism and Kinetics of Precipitation Process in Selected Copper Alloys
(
Rdzawski Z.
), s. 649--658
artykuł:
The Structural Relaxation and its Influence on High Field Magnetization Processes
(
Pietrusiewicz P.
,
Nabiałek M.
,
Szota M.
,
Dośpiał M.
,
Błoch K
,
Bukowska A.
,
Gruszka K.
), s. 659--662
artykuł:
Influence of Annealing on the Microstructure and Magnetic Properties in Amorphous Alloys
(
Pietrusiewicz P.
,
Nabiałek M.
,
Szota M.
,
Dośpiał M.
,
Błoch K
,
Gondro J.
,
Gruszka K.
), s. 663--666
artykuł:
Technology of Repairing QE22 Alloy Casts
(
Turowska A.
,
Adamiec J.
,
Rzychoń T.
), s. 667--673
artykuł:
Characteristic of Carbon Nanotubes Modified with Cobalt, Copper and Bromine
(
Zygoń P.
,
Peszke J.
,
Gwoździk M.
,
Nitkiewicz Z.
,
Malik M.
), s. 675--679
artykuł:
The Analysis of the Mechanical Properties of High Carbon Steel Wires after Multipass High Speed Drawning Process in Conventional and Hydrodynamic Dies
(
Suliga M.
), s. 681--685
artykuł:
Manufacturing of Ferritic Low-Silicon and Molybdenum Ductile Cast Iron with the Innovative 2PE-9 Technique
(
Guzik E.
,
Kopyciński D.
,
Wierzchowski D.
), s. 687--691
artykuł:
Influence of the Selected Factors on Thermal Fatigue of the ADI in an Aspect of its Suitability as the Material for Metal Moulds
(
Zych J.
,
Wróbel J.
), s. 693--697
artykuł:
Methods of Additive Manufacturing used in the Technology of Skeleton Castings
(
Piekło J.
,
Maj M.
), s. 699--702
artykuł:
The Research of Properties of Experimental Ceramic Layers
(
Karwiński A.
,
Żółkiewicz Z.
), s. 703--705
artykuł:
Mechanical and Tribological Properties of Metal Matrix Composites Reinforced with Short Carbon Fibre
(
Łągiewka M.
), s. 707--711
artykuł:
Measurement of Electrical Properties as Effectiveness Appraisal of Microwave Absorption by Moulding and Core Sands Subject to Microwave Utilization
(
Nowak D.
,
Granat K.
,
Opyd B
), s. 713--716
artykuł:
Elimination of Negative Effect of Fe in Secondary Alloys AlSi6Cu4 (En Ac 45 000, A 319) by Nickel
(
Bolibruchová D.
,
Macko J.
,
Brůna M.
), s. 717--721
artykuł:
Equiaxed and Oriented Microstructure in High Chromium Cast Iron
(
Kopyciński D.
,
Guzik E.
,
Szczęsny A.
), s. 723--726
artykuł:
Proposal of Method of Removal of Mould Material from the Fine Structure of Metallic Foams used as Filters
(
Kroupová I.
,
Bednářová V.
,
Elbel T.
,
Radkovský F.
), s. 727--730
artykuł:
Theoretical and Practical Aspects of Pneumatic Powder Injection into Liquid Alloys with a Non-Submerged Lance
(
Jezierski J.
,
Janerka K.
,
Stawarz M.
), s. 731--734
artykuł:
Alternative Evaluation of the Properties of the Silica Sands
(
Beňo J.
,
Mikšovský F.
,
Jelinek P.
,
Konečná K.
,
Smysl P.
), s. 735--738
artykuł:
The Measurement of High-Temperature Expansion as the Standard of Estimation the Knock-Out Properties of Moulding Sands with Hydrated Sodium Silicate
(
Major-Gabryś K.
,
Dobosz S.M.
,
Jelínek P.
,
Jakubski J.
,
Beňo J.
), s. 739--742
artykuł:
Computer-Assisted Integration of Knowledge in the Context of Identification of the Causes of Defects in Castings
(
Kluska-Nawarecka S.
,
Wilk-Kolodziejczyk D.
,
Dajda J.
,
Macura M.
,
Regulski K.
), s. 743--746
artykuł:
Influence of Selected Parameters of Continuous Casting in the Electromagnetic Field on the Distribution of Graphite and Properties of Grey Cast Iron
(
Szajnar J.
,
Stawarz M.
,
Wróbel T.
,
Sebzda W.
), s. 747--751
artykuł:
Protecting Melted Zinc-Aluminium based Foundry Alloys Against Hydrogen Pick-Up
(
Krajewski W. K.
,
Piwowarski G.
,
Krajewski P. K.
), s. 753--755
artykuł:
Possibilities of Reclamation Microwave-Hardened Molding Sands with Water Glass
(
Stachowicz M.
,
Granat K.
), s. 757--760
artykuł:
Effect of Cr and V Alloy Additions on the Microstructure and Mechanical Properties of Am60 Magnesium Alloy
(
Rapiejko C.
,
Pisarek B.
,
Pacyniak T.
), s. 761--765
artykuł:
Distribution of reinforcing particles in the pressure die cast AlSi11/20% SiC composite
(
Pasieka A.
,
Konopka Z.
), s. 767--770
artykuł:
Forming the Structure of Composite Metallic Foams
(
Gawdzińska K.
,
Grabian J.
,
Szweycer M.
,
Przetakiewicz W.
), s. 771--773
artykuł:
Structure and Properties Research of Casts Made with Copper Alloys Matrix
(
Rzadkosz S.
,
Garbacz-Klempka A.
,
Kozana J.
,
Piękoś M.
,
Kranc M.
), s. 775--778
artykuł:
A Study of the Impact of Power Supply Parameters on Metal Flow Velocity in the Channel of a Device for Washing out Precious Metals from of the Automotive Catalytic Converters
(
Fornalczyk A.
,
Golak S.
,
Przyłucki R.
,
Willner J.
), s. 779--783
artykuł:
A Study on Emissions from Afterburning Chambers Included in Metallurgical Thermal Equipment
(
Gil S.
,
Rozpondek M.
,
Bialik W.
), s. 785--788
artykuł:
Possibilities of 3D Model Application in the Process of Aluminium Refining in the Unit With Rotary Impeller
(
Merder T.
,
Saternus M.
,
Warzecha P.
), s. 789--794
artykuł:
Influence of the Bed Type on the Flow Resistance Change During the Two-Phase (Gas + Powder) Flow through the Descending Packed Bed
(
Panic B.
), s. 795--800
artykuł:
Preliminary Studies on Simultaneous Recovery of Precious Metals from Different Waste Materials by Pyrometallurgical Method
(
Willner J.
,
Fornalczyk A.
,
Cebulski J.
,
Janiszewski K.
), s. 801--804
artykuł:
The Dynamic Characteristics Research of Compact Heat Regenerator used in Regenerative Burners for Metallurgical Heating Furnaces
(
Wnęk M.
), s. 805--808
artykuł:
Evaluation of Influence of Briquetted Synthetic Slags on Slag Regime and Process of Steel Desulphurization
(
Socha L.
,
Michalek K.
,
Bažan J.
,
Gryc K.
,
Machovčák P.
,
Opler A.
,
Styrnal P.
), s. 809--813
artykuł:
Biomass as a Source of Energy in Iron Ore Agglomerate Production Process
(
Fröhlichová M.
,
Legemza J.
,
Findorák R.
,
Mašlejová A.
), s. 815--820
artykuł:
Microstructure Evolution and Mechanical Properties of C-Mn Cold Rolled Dual Phase Steel after Continuous Annealing Process in Laboratory Conditions
(
Šebek M.
,
Horňak P.
,
Zimovčák P.
,
Longauer S.
), s. 821--824
artykuł:
Effects of Pressure on the Rate of Tin Evaporation From Liquid Iron
(
Lipart J.
,
Łabaj J.
,
Słowikowski M.
,
Jama D.
), s. 825--828
rozwiń roczniki
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.