Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-6555f787-a27f-45b6-b0bb-980cd5acecf9

Czasopismo

Journal of KONES

Tytuł artykułu

Modelling of thermodynamics, mass exchange and heat transfer of plasmatron plasma reactor for recycling of used electric and electronic components

Autorzy Szałatkiewicz, J.  Budny, E.  Szewczyk, R. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN New technologies and systems require precise insight of theirs parameters, which are in some cases difficult to measure. One of technique for obtaining of such data is simulation and modelling of objects, processes and theirs parameters. Application of mathematical modelling for thermodynamics, mass exchange and heat transfer calculation is presented in this article. Mathematical model of the plasmatron plasma reactor was developed and allows simulation of reactor and process parameters including: heat release during combustion, heat transfer from combustion process and exhaust gases to the reactors walls, temperature calculation inside the chamber, surface film conductance by convection and radiation, heat carried out with fumes, and other. The model was implemented in OCTAVE software and it can be calculated for relatively short time on single PC computer. Model of plasmatron reactor chamber allows quantitative simulation of the phenomena occurring in the exanimated process. Moreover, model allows answering how to control the process, and identification of correlations with sensitivity analysis. The article presents results of modelling of key process parameters of the plasma reactor essential for developed process understanding and analysis. Calculations results are interesting and important for further technology development for example, change of heat carried with fumes, or surface film conductance, which are hard to measure. Developed model offers good accuracy of calculations and correlation to measurements on experimental setup, and allows further optimization, scaling and development.
Słowa kluczowe
EN model   simulation   recycling   energy recovery   combustion   environmental protection   electric waste   electronic waste  
Wydawca Institute of Aviation
Czasopismo Journal of KONES
Rocznik 2016
Tom Vol. 23, No. 2
Strony 357--363
Opis fizyczny Bibliogr. 7 poz., rys.
Twórcy
autor Szałatkiewicz, J.
  • Industrial Research Institute for Automation and Measurements PIAP Jerozolimskie Avenue 202, 02-486 Warsaw, Poland tel.: +48 22 8740278, jszalatkiewicz@piap.pl
autor Budny, E.
  • Industrial Research Institute for Automation and Measurements PIAP Jerozolimskie Avenue 202, 02-486 Warsaw, Poland tel.: +48 22 8740278
autor Szewczyk, R.
  • Warsaw University of Technology Faculty of Mechatronics St. A. Boboli Street o, 02-525 Warsaw, Poland
Bibliografia
[1] GNU Octave 3.8.2, https://www.gnu.org/software/octave/.
[2] Kowalewicz, A., Podstawy procesów spalania, WNT, Warszawa, 2000.
[3] Mizerski, W., Praca zbiorowa pod red., Tablice fizyczno-astronomiczne, Wyd IV, Adamantan, Warszawa, 2005.
[4] Pogorzelski, J., Fizyka Budowli, Przenikanie ciepła wstanie ustalonym przez przegrody budowlane wg PNEN, Podręczniki Fizyki Budowli, Materiały Budowlane, Nr 386, Vol. 10, 2004.
[5] Smirnov, B., Fundamentals of Ionized Gases: Basic Topics in Plasma Physics, WILEY-VCH, pp. 166, 2012.
[6] Szałatkiewicz, J., Energy recovery form waste of printed circuit boards in plasmatron plasma reactor, Polish Journal of Environmental Studies, Vol. 23, No. 1, pp. 277-281, 2014.
[7] Wybrane Tablice Cieplne, (materiały pomocnicze do ćwiczeń z termodynamiki i wymiany Ciepła), Politechnika Krakowska, Wydział Inżynierii Środowiska, Krakow 2006.
Uwagi
PL Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-6555f787-a27f-45b6-b0bb-980cd5acecf9
Identyfikatory
DOI 10.5604/12314005.1213751