Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-61ddd44b-c46b-4de6-ac23-e757e4c5ed14

Czasopismo

Journal of KONES

Tytuł artykułu

Detection of damages in hybrid composite plates with the use of elastic waves generated by PZT active sensors

Autorzy Barski, M.  Pająk, P. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The presented article is devoted to the problem of detection and localization of damages occurring in components of structures, which are made of hybrid composite materials. The subject of the work is a square plate consisting of a single layer made of aluminum alloy and several layers made of glass fibres (glass fabric) and epoxy resin. On the surface, which is made of composite, 12 piezoelectric elements are installed. These elements sequentially, one by one, generates a signal that is further recorded by the remaining piezoelectric elements. Picked up signal for the selected pair of activator – sensor is compared with the reference signal. The reference signal corresponds to the intact structure. This kind of approach is known as the pitch – catch configuration. In situations when the signal obtained for interrogated structure and reference one differs significantly, this may indicate that a damage exists between the activator and the sensor. Next, taking into account the information obtained from the other sensors, it is possible not only to detect but also to determine the approximate location of the flaw and to estimate its size. In order to visualize the obtained results, an especially dedicated software is developed according to the algorithms available in the literature – probability ellipse. Several computer simulations of wave propagation are performed using the finite element method. The proposed procedure is also tested experimentally. The presented approach makes it possible to detect both single and multiple damages.
Słowa kluczowe
EN elastic waves   hybrid composite plates   piezoelectric active sensors   low velocity impact   damages   FEM  
Wydawca Institute of Aviation
Czasopismo Journal of KONES
Rocznik 2017
Tom Vol. 24, No. 2
Strony 17--24
Opis fizyczny Bibliogr. 12 poz., rys.
Twórcy
autor Barski, M.
  • Cracow University of Technology, Faculty of Mechanical Engineering Jana Pawła II Av. 37, 31-864 Cracow, Poland tel.: +48 12 6283389, +48 12 6283621, fax: +48 12 6283360, mbar@mech.pk.edu.pl
autor Pająk, P.
  • Cracow University of Technology, Faculty of Mechanical Engineering Jana Pawła II Av. 37, 31-864 Cracow, Poland tel.: +48 12 6283389, +48 12 6283621, fax: +48 12 6283360, ppajak@mech.pk.edu.pl
Bibliografia
[1] Manikandan, P., Chai, G. B., A similitude approach towards the understanding of low velocity impact characteristics of bi-layered hybrid composite structures, Composite Structure, Vol. 131, pp. 183-192, 2015.
[2] Santos, M. J., Santos, J. B., Amaro, A. M., Neto, M. A., Low velocity impact damage evaluation in fiber glass composite plates using PZT sensors, Composites: Part B, Vol. 55, pp. 269-276, 2013.
[3] Giurgiutiu, V., Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Elsevier, 2008.
[4] Staszewski, W. J., Mahzan, S., Traynor, R., Health monitoring of aerospace composite structures – Active and passive approach, Composites Science and Technology, Vol. 69, pp. 1678-1685, 2009.
[5] Senyurek, V. Y., Detection of cuts and impact damage at the aircraft wing slat by using Lamb wave method, Measurement, Vol. 67, pp. 10-23, 2015.
[6] Ochôa, P., Infante, V., Silva, J. M., Groves, R. M., Detection of multiple low-energy impact in composite plates using Lamb wave technique, Composites: Part B, Vol. 80, pp. 291-298, 2015.
[7] Rosalie, S. C., Vaughan, M., Bremner, A., Chiu, W. K., Variation in the group velocity of Lamb waves as a tool for detection of delamination in GLARE aluminum plate-like structures, Composite Structures, Vol. 66, pp. 77-86, 2004.
[8] Yeum, C. M., Sohn, H., Ihn, J. B., Lim, H. J., Instantaneous delamination detection in a composite plate using a dual piezoelectric transducer network, Composite Structures, Vol. 94, pp. 3490-3499, 2012.
[9] De Fenza, A., Sorrentino, A., Vitiello, P., Application of Artificial Neural Networks and Probability Ellipse methods for damage detection using Lamb waves, Composite Structures, Vol. 133, pp. 390-403, 2015.
[10] Yang, B., Xuan, F.-Z., Chen, S., Zhou, S. Gao, Y., Xiao, B., Damage localization and identification in WGF/epoxy composite laminates by using Lamb waves: Experiment and simulation, Composite Structure, Vol. 165, pp. 138-147, 2017.
[11] Su, Z., Ye, L., Identification of Damage Using Lamb Waves from Fundamentals to Applications, Springer-Verlag, Berlin Heidelberg, 2009.
[12] Muc, A., Stawiarski, A., Location of delamination in curved laminated panels, Composite Structure, Vol. 133, pp. 652-658, 2015.
Uwagi
PL Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-61ddd44b-c46b-4de6-ac23-e757e4c5ed14
Identyfikatory
DOI 10.5604/01.3001.0010.2891