Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-5ccb973a-1392-4a9e-8cf3-9f68a74d5bf9

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

The Fluidity of Al-Si Alloy: Computer Simulation of the Influence of Temperature, Composition, and Pouring Speed

Autorzy Futáš, P.  Petrík, J.  Pribulová, A.  Blaško, P.  Palfy, P. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The purpose of this study is to identify relationships between the values of the fluidity obtained by computer simulation and by an experimental test in the horizontal three-channel mould designed in accordance with the Measurement Systems Analysis. Al-Si alloy was a model material. The factors affecting the fluidity varied in following ranges: Si content 5 wt.% – 12 wt.%, Fe content 0.15 wt.% – 0.3 wt. %, the pouring temperature 605°C-830°C, and the pouring speed 100 g · s-1– 400 g · s-1. The software NovaFlow&Solid was used for simulations. The statistically significant difference between the value of fluidity calculated by the equation and obtained by experiment was not found. This design simplifies the calculation of the capability of the measurement process of the fluidity with full replacement of experiments by calculation, using regression equation.
Słowa kluczowe
EN Al-Si   fluidity   computer simulation   regression analysis   Monte Carlo method  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2018
Tom Vol. 63, iss. 4
Strony 1799--1804
Opis fizyczny Bibliogr. 17 poz., rys., tab., wzory
Twórcy
autor Futáš, P.
  • Technical University of Kosice, Faculty of Materials, Metallurgy and Recycling, Letná 9, 042 00 Kosice, Slovak Republic
autor Petrík, J.
  • Technical University of Kosice, Faculty of Materials, Metallurgy and Recycling, Letná 9, 042 00 Kosice, Slovak Republic, jozef.petrik@tuke.sk
autor Pribulová, A.
  • Technical University of Kosice, Faculty of Materials, Metallurgy and Recycling, Letná 9, 042 00 Kosice, Slovak Republic
autor Blaško, P.
  • Technical University of Kosice, Faculty of Materials, Metallurgy and Recycling, Letná 9, 042 00 Kosice, Slovak Republic
autor Palfy, P.
  • Technical University of Kosice, Faculty of Materials, Metallurgy and Recycling, Letná 9, 042 00 Kosice, Slovak Republic
Bibliografia
[1] L. Wang, M. Makhlouf, D. Apelian, Int. Mater. Rev. 40 (6), 221-238 (2010). https://doi.org/10.1179/imr.1995.40.6.221.
[2] M. Di Sabatino, L. Arnberg, F. Bonollo, Metall. Sci. Technol. 23, 3-10 (2005).
[3] T. O. Mbuya, B. O. Odera, S. P. Ng’ang’a, Int. J. Cast Met. Res. 16 (5), 451-465 (2003).
[4] J. Petrík, P. Szarvasy, V. Špeťuch, Acta Metall. Slovaca 10 (2), 73-79 (2004). http://www.ams.tuke.sk/data/ams_online/2004/number2/mag01/mag01.pdf
[5] D. Bolibruchová, M. Žihalová, Arch. Metall. Mater. 59 (3), 1029-1032 (2014). DOI: 10.2478/amm-2014-0172.
[6] M. B. Djurdjević, Z. Odanović, J. Pavlović-Krstić, Assoc. Metall. Eng. Serbia. 16 (1), 63-76 (2010). https://www.dykast.com/user/products/4329-pdfs-2-file.pdf
[7] O. A. Adefuye, Transnatl. J. Sci. Technol. 4 (1), 16-30 (2014). http://tjournal.org/tjst_january_2014/03.pdf?i=1
[8] G. Timelli, F. Bonollo, Int. J. Cast Met. Res. 20 (6), 304-311 (2007). doi:10.1179/136404608X286110
[9] J. Campbell, R. A. Harding, Train. Alum. Appl. Technol. Talat Lect. 3205, 2-4 (1994).
[10] P. Futáš, J. Petrík, A. Pribulová, The analysis of Al-Si alloys fluidity test in computer simulation, in: Proceedings of the 14th SGEM GeoConference on Informatics, Geoinformatics and Remote Sensing, Albena, Bulgaria, 371-378 (2014). doi:10.5593/SGEM2014/B21/S7.047
[11] P. Futáš, J. Petrík, A. Pribulová, M. Bartošová, Key Eng. Mater. 635, 45-50 (2014). doi:10.4028/www.scientific.net/KEM.635.45
[12] B. Ravi, Indian Foundry J. (special issue), 1-12 (2008). http://orthocad.iitb.ac.in/Academy/TechnicalPapers/2008/2008IFJ_CastingSimulation.pdf
[13] ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000, ISO, Brussels (2003).
[14] M. Down et al. Measurement Systems Analysis. AIAG Reference Manual,: Chrysler Group LLC, Ford Motor Company, and General Motors Corporation, Southfield, 103-123 (2010).
[15] http://www.novacast.se/product/novaflowsolid, accessed: 30.10.2016
[16] Sienkowski, Metrol. Meas. Syst. 20 (2), 249-262 (2013). doi:10.2478/mms-2013-0022
[17] http://www.biostathandbook.com/multipleregression.html, accessed 05.03.2016
Uwagi
EN This work was supported by the Slovak Grant Agency for Science VEGA 1/0073/17 and 1/0703/16.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-5ccb973a-1392-4a9e-8cf3-9f68a74d5bf9
Identyfikatory
DOI 10.24425/amm.2018.125107