Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-4a735b00-3284-41b6-af19-b2f4ee821bd8

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

Segregation of Elements in Billets Made of Carbon Steels for Long Products

Autorzy Hutny, A. M.  Warzecha, M.  Wieczorek, P.  Derda, W. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN The article presents the results of investigations performed on segregation of elements in the billets. The research were performed under standard industrial conditions, during high carbon steel production cycle. Probes (templates with the thickness of 20 mm) were taken from billets with square cross-section of 160 mm. Segregation of elements was determined based on the quantitative analysis of results performed by using spark spectrometry pursuant to PN-H-04045. Changes in concentrations of elements were analysed along two cross-sections. Element contents were performed at points distanced from each other by approx. 10 mm. The segregation of carbon, sulphur and phosphorus was determined for different billets.
Słowa kluczowe
EN steelmaking   continuous casting   billet   segregation   optical emission spectrometry  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2018
Tom Vol. 63, iss. 4
Strony 2075--2079
Opis fizyczny Bibliogr. 8 poz., rys., tab., wzory
Twórcy
autor Hutny, A. M.
  • Czestochowa University of Technology, Department of Metals Extraction and Recirculation, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland
autor Warzecha, M.
  • Czestochowa University of Technology, Department of Metals Extraction and Recirculation, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland, warzecha@wip.pcz.pl
autor Wieczorek, P.
  • Czestochowa University of Technology, Institute of Material Engineering, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland
autor Derda, W.
  • Czestochowa University of Technology, Department of Metals Extraction and Recirculation, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland
Bibliografia
[1] S. Yogeshwar, Metal. and Mater. Trans. B, 47, 2096-2106 (2016).
[2] T. R.Vijayaram, International Journal of Manufacturing & Industrial Engineering 1, 17-36 (2014).
[3] J. Dongbin, W. Weiling, L. Sen, J. Cheng, Z. Miaoyong, Metal. and Mater. Trans. B, 48, 3120-3131 (2017).
[4] A. Ghosh, Sādhanā 26, 5-24 (2001).
[5] M. Changwen, S. Houfa, H. Tianyou, Tsinghua Science and Technology 9, 550-554 (2004).
[6] J. Dongbin, Z. Miaoyong, Metal. and Mater. Trans. B, 48, 2096 - 2106 (2017).
[7] J. Cibulka, D. Bocek, T. Huczala, J. Cupek, Journal of of Achievements in Materials and Manufacturing Engineering 55, 638-643 (2012).
[8] A. M. Hutny, M. Warzecha, W. Derda, P. Wieczorek, Archives of Metallurgy and Materials 61, 2037-2042, (2016).
Uwagi
EN Acknowledgements to the National Centre for Research and Development for financial support (project No PBS2/A5/32/2013). This scientific work has been partly financed from the resources of Ministry of Science and Higher Education as statutory researches.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-4a735b00-3284-41b6-af19-b2f4ee821bd8
Identyfikatory
DOI 10.24425/amm.2018.125145