PL
|
EN
Szukaj
Przeglądaj
Pomoc
O bazie
test
Preferencje
Polski
English
Język
Widoczny
[Schowaj]
Abstrakt
10
20
50
100
Liczba wyników
Tom - szczegóły
Adres strony
Kopiuj
Tytuł artykułu
Vol. 64, iss. 4
Czasopismo
Archives of Metallurgy and Materials
Wydawca
Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Rocznik
2019
Identyfikatory
Zawartość wolumenu
Vol. 64, iss. 4
artykuł:
Real Time Thermal Imaging of Solid Oxide Fuel Cell
(
Jasiński M.
,
Ziewiec K.
,
Wojciechowska M.
), s. 1207--1212
artykuł:
Possibilities to Obtain Products from 2024 and 7075 Chips in the Process of Consolidation by KoBo Extrusion
(
Pawłowska B.
,
Śliwa R. E.
,
Zwolak M.
), s. 1213--1221
artykuł:
Selective Corrosion of Al2Cu Intermetallic Phase in Orthophosphoric Acid Aqueous Solutions
(
Kwolek P.
,
Gradzik A.
,
Szeliga D.
,
Kościelniak B.
), s. 1223--1229
artykuł:
A New Approach to Experimental Testing of Sheet Metal Formability for Automotive Industry
(
Jasiński C.
,
Kocańda A.
,
Morawiński Ł.
,
Świłło S.
), s. 1231--1238
artykuł:
Thermodynamic Description of Ternary Fe-B-X Systems. Part 5: Fe-B-Si
(
Miettinen J.
,
Visuri V.-V.
,
Fabritius T.
,
Milcheva N.
,
Vassilev G.
), s. 1239--1248
artykuł:
Thermodynamic Description of Ternary Fe-B-X Systems. Part 6: Fe-B-Ti
(
Miettinen J.
,
Visuri V.-V.
,
Fabritius T.
,
Milcheva N.
,
Vassilev G.
), s. 1249--1255
artykuł:
Raman Spectroscopy Studies of Carbon-Based Cathode Materials during Aluminum Electrolysis
(
Wang Wei
,
Chen Weijie
), s. 1257--1261
artykuł:
The Influence of the Use of Fasteners with Different Stiffness in Hybrid Joints Subjected to Complex Mechanical Loads
(
Sadowski T.
,
Nowicki M.
,
Golewski P.
), s. 1263--1268
artykuł:
The Effect of Manganese on the Crystallisation Process, Microstructure and Selected Properties of Compacted Graphite iron
(
Gumienny G.
,
Kurowska B.
,
Just P.
), s. 1269--1275
artykuł:
Tailored Al2O3-Al2TiO5-TiO2 Composite Ceramics from different Titanium Precursors
(
Dittert B.
,
Wiessner M.
,
Angerer P.
,
Lackner J. M.
,
Leichtfried H.
), s. 1277--1286
artykuł:
The Influence of the Superheat Temperature on the Slab Structure in the Continuous Steel Casting Process
(
Drożdż P.
), s. 1287--1293
artykuł:
The Influence of the Angle of Working Part of Die on the Zinc Coating Thickness and Mechanical Properties of Medium Carbon Steel Wires
(
Suliga M.
,
Wartacz R.
), s. 1295--1299
artykuł:
Influence of Milling Time on Formation of NiTi Alloy Produced by High-Energy Ball Milling
(
Salwa P.
,
Goryczka T.
), s. 1301--1307
artykuł:
Structure and Properties of Ni/Diamond Nanocrystalline Coatings
(
Mazurek A.
,
Trzaska M.
), s. 1309--1314
artykuł:
Application of X-Ray Diffraction to Analyse Phase Composition of Aluminium Alloys for Plastic Working
(
Pachut K.
,
Żelechowski J.
,
Boczkal S.
), s. 1315--1319
artykuł:
Impact of the Method of Separating Graphene from the Growth Substrate on the Quality of the 2D Material Obtained
(
Dybowski K.
,
Romaniak G.
,
Kula P.
,
Jeziorna A.
,
Kowalczyk P.
,
Atraszkiewicz R.
,
Kołodziejczyk Ł.
,
Nowak D.
,
Zawadzki P.
,
Kucińska M.
), s. 1321--1326
artykuł:
Effect of Various Organic Additives in Galvanic Bath on Properties of Ni-SiC Composite Coatings
(
Nowak M.
,
Mizera J.
,
Kłyszewski A.
,
Dobkowska A.
,
Boczkal S.
,
Kozik A.
,
Koprowski P.
), s. 1327--1333
artykuł:
Anodic Oxide Coatings on Aluminium Resistant to Strong Alkali Environment
(
Kozik A.
,
Nowak M.
,
Gędłek K.
,
Leśniak D.
,
Zasadziński J.
,
Jurczak H.
), s. 1335--1342
artykuł:
Solid State Synthesis of Europium Zirconate Based Material
(
Mikuśkiewicz M.
,
Moskal G.
), s. 1343--1352
artykuł:
The Effect of the Length of the Drawing Die Sizing Portion on the Energy and Force Parameters of the Medium-Carbon Steel Wire Drawing Process
(
Suliga M.
,
Jabłońska M.
,
Hawryluk M.
), s. 1353--1359
artykuł:
Numerical and Experimental Modeling of Plastic Deformation the Multi-Layer Ti/Al/Mg Materials
(
Mróz S.
,
Stefanik A.
,
Szota P.
,
Kwapisz M.
,
Wachowski M.
,
Śnieżek L.
,
Gałka A.
,
Szulc Z.
), s. 1361--1368
artykuł:
Physical Simulation of the Mannesmann Effect in the Rolling Process
(
Wójcik Ł.
,
Pater Z.
), s. 1369--1375
artykuł:
Thermomechanical Analysis of the Charge Heating in a Rotary Furnace
(
Gołdasz A.
,
Malinowski Z.
,
Cebo-Rudnicka A.
), s. 1377--1384
artykuł:
Friction Stir Welding of Ultrathin AA2024-T3 Aluminum Sheets Using Ceramic Tool
(
Myśliwiec P.
,
Śliwa R. E.
,
Ostrowski R.
), s. 1385--1394
artykuł:
Evaluation of Adhesive Wear Mechanism for Application in Hybrid Tool Wear Model in Hot Forging Process
(
Wilkus M.
,
Rauch Ł.
,
Szeliga D.
,
Pietrzyk M.
), s. 1395--1402
artykuł:
Numerical Modelling of Welding of Car Body Sheets Made of Selected Aluminium Alloys
(
Wojdat T.
,
Kustroń P.
,
Jaśkiewicz K.
,
Zwierzchowski M.
,
Margielewska A.
), s. 1403--1409
artykuł:
Microstructure and Mechanical Properties of Braze Welded Joints of Copper with Austenitic Steel Made by CMT Method
(
Wojdat T.
,
Kustroń P.
,
Margielewska A.
,
Stachowicz M.
), s. 1411--1420
artykuł:
Analysis of the Industrial Process of Producing a Lever-Type Forging Used in Motorcycles
(
Hawryluk M.
,
Zwierzchowski M.
,
Rychlik M.
,
Gronostajski Z.
), s. 1421--1432
artykuł:
Computer Simulation of Cast Iron Flow in Castability Trials
(
Popielarski P.
,
Hajkowski J.
,
Sika R.
,
Ignaszak Z.
), s. 1433--1439
artykuł:
Numerical Simulations of X22CrMoV12-1 Steel Multilayer Welding
(
Kik T
,
Moravec J.
,
Novakova I.
), s. 1441--1448
artykuł:
Physical and Numerical Modeling of Duplex Cast Steel Thin-Walled Castings
(
Stradomski G.
,
Nadolski M.
,
Zyska A.
,
Kania B.
,
Rydz D.
), s. 1449--1456
artykuł:
Investigation of the Influence of Process Parameters on Shape Deviation after Wire Electrical Discharge Machining
(
Świercz R.
,
Oniszczuk-Świercz D.
,
Zawora J.
,
Marczak M.
), s. 1457--1462
artykuł:
The Methodology of Analysis on Geometrical Changes of a Mixed Zone in Resistance-Heated Samples
(
Dębiński T.
,
Głowacki M.
,
Hojny M.
), s. 1463--1470
artykuł:
An Impact of Assembly Interference on Stresses in the Die Tool System During Bolt Forging
(
Nowotyńska I.
,
Kut S.
,
Osetek M.
), s. 1471--1478
artykuł:
Structure and Properties of Nanocomposite Nickel/Graphene Oxide Coatings Produced by Electrochemical Reduction Method
(
Cieślak G.
,
Trzaska M.
), s. 1479--1486
artykuł:
Research on the Production Process of High-Strength Products from Aluminum-Magnesium Alloys for their Direct Processing into Sheets Via Cold Rolling
(
Ściężor W.
,
Mamala A.
,
Kowal R.
,
Kwaśniewski P.
,
Franczak K.
,
Strzępek P.
), s. 1487--1493
artykuł:
The Effect of the Asymmetrical Rolling Process on Structural Changes in Hot-Rolled Bimetal Sheets
(
Rydz D.
,
Koczurkiewicz B.
,
Stradomski G.
,
Garstka T.
,
Wypart J.
), s. 1495--1501
artykuł:
Theoretical and Experimental Analysis of Mg/Al Bimetallic Handle Forging Process
(
Szota P.
,
Mróz S.
,
Gontarz A.
,
Stefanik A.
), s. 1503--1512
artykuł:
Effect of Shot Peening With Glass Microspheres on the Fatigue Behavior of a Low Carbon Steel
(
de Lacerda J. C.
,
Pereira I. R.
,
Costa J. M. G.
,
Pinto J. S.
,
Souza H. F. M.
,
Fonseca M. A.
), s. 1513--1518
artykuł:
Novel SiC Dispersion Strengthened Austenitic Steels Prepared by Powder Technology
(
Ben Zine Haroune Rachid
,
Sahin Filiz Cinar
,
Czigány Zsolt
,
Balázsi Katalin
,
Balázsi Csaba
), s. 1519--1526
artykuł:
Fabrication of Aluminum - Cr3C2 Surface Composites through Friction Stir Processing and Analyzing its Microstructural and Mechanical Evolution
(
Satheeshkumar J.
,
Jayaraman M.
,
Priyadharshini G. S.
,
Sathya Mukesh C. S.
), s. 1527--1532
artykuł:
Microstructural Features and Mechanical Properties after Applying Rolling with Cyclic Movement of Rolls of an Al-Li Alloys
(
Brzezińska A.
,
Urbańczyk-Gucwa A.
,
Molak R.
,
Rodak K.
), s. 1533--1540
artykuł:
Influence of Recast Layer on the Fatigue Life of Ti6Al4V Processed by Electric Discharge Machining
(
Eakambaram A.
,
Xavior M. A.
), s. 1541--1548
artykuł:
The Kinetic of Al3Ti Phase Growth in Explosively Welded Multilayered Al/Ti Clads during Annealing under Load Conditions
(
Petrzak P.
,
Mania I.
,
Paul H.
,
Maj Ł.
,
Gałka A.
), s. 1549--1554
artykuł:
Life Prediction Mechanism of Ladle Composite Structure Body Based on Simulation Technology
(
Li Gongfa
,
Jiang Du
,
Sun Ying
,
Jiang Guozhang
,
Tao Bo
), s. 1555--1562
artykuł:
Crystallographic Texture and Grain Refinement in the CuCr Alloy Deformed by SPD Method
(
Urbańczyk-Gucwa A.
,
Brzezińska A.
,
Adamczyk-Cieślak B.
,
Rodak K.
), s. 1563--1568
artykuł:
Amount and Distribution of Micro-Defects in Solidified 2219 Al Alloy Ingots: a Metallographic Investigation
(
Liu Yu
,
Huang Yuanchun
,
Xiao Zhengbing
), s. 1569--1575
artykuł:
Fatigue Behavior of MIG-Welded 7N01-T4 Aluminum Alloy with Different V-Groove Angles
(
Ma Zhongwei
,
Li Qinghua
,
Ma Lin
,
He Zhaokun
,
Liang Zhimin
), s. 1577--1584
artykuł:
Influence of High Pressure-High Temperature Method on the Selected Mechanical Properties of Steel AISI 316L with 2% TiB2
(
Kurtyka P.
,
Sulima I.
,
Hyjek P.
,
Jaworska L.
), s. 1585--1592
artykuł:
Mechanism and Synthesis of Yttrium Iron (Y-Fe) Alloy by Low Temperature Process Using Calcium as Reductant
(
Ilayaraja Marimuthu
,
Berchmans L. John
,
Sankaranarayan Sankara Raman
), s. 1593--1596
artykuł:
High Temperature Oxidation Process of P91 Steel in CO2 Atmosphere Containing SO2
(
Kominko H.
,
Jaroń A.
), s. 1597--1602
artykuł:
Peridynamic Simulation of Crushing Processes in Copper Open-Cell Foam
(
Postek E.
,
Pęcherski R. B.
,
Nowak Z.
), s. 1603--1610
artykuł:
The Morphology of Eutectic Copper Oxides I (Cu2O) in The Processing of Wire Rod and Wires made from ETP Grade Copper
(
Zasadzińska M.
,
Knych T.
), s. 1611--1616
artykuł:
Corrosion Characteristics of Composites of (Mo, Ti)C Ti and TiC/Ti Type Manufactured with SLM technique
(
Figiel P.
,
Biedunkiewicz A.
,
Biedunkiewicz W.
,
Grzesiak D.
,
Pawlyta M.
), s. 1617--1625
artykuł:
The Impact of Crushed Rock Spoil on Pitting Corrosion of Selected Stainless Steels
(
Krakowiak S.
,
Kierepa S.
), s. 1627--1632
artykuł:
Sintered Steels Coated with a Chromium Layer Doped with Diamond Nanoparticles
(
Petkov V.
,
Valov R.
,
Witkowska M.
,
Madej M.
,
Cempura G.
,
Sułowski M.
), s. 1633--1638
artykuł:
Problems of Processing and Separation of Multi-Material Electronic Waste in Terms of Circular Economy
(
Lisińska M.
,
Fornalczyk A.
,
Willner J.
), s. 1639--1643
artykuł:
Silicon Carbide Fabrication by Infiltration of Molten Fe-Si Alloy Through Two-Step Reaction Sintering
(
Hanada Yoshitsugu
,
Xiao Yang
,
Sonoda Akio
,
Kang Hyo-Gyoung
,
Nagayoshi Hideaki
,
Yamamoto Atsuo
,
Tokunaga Tatsuya
), s. 1645--1652
artykuł:
Structure and Properties of Zn/MoS2 Composite Coatings Produced by Electrochemical Reduction
(
Szmigielska K.
,
Trzaska M.
), s. 1653--1659
artykuł:
Transformation Kinetics of Austempered Ductile Iron: Dilatometric Experiments and Model Parameter Evaluation
(
Suchocki C.
,
Myszka D.
,
Wasiluk K.
), s. 1661--1666
rozwiń roczniki
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.