Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-2a37e388-123c-4aee-9be5-2720cbdec50c

Czasopismo

Archives of Foundry Engineering

Tytuł artykułu

Environmentally friendly mould technology

Autorzy Izdebska-Szanda, I.  Palma, A.  Angrecki, M.  Żmudzińska, M. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN One of the factors that contribute to the development of foundry moulding technology is environmental protection. The related challenges are effectively satisfied by a new inorganic binder that has been designed for castings made of non-ferrous metal alloys. This article presents in a concise way the test results, showing the ecological character of the new binder at the stage of making moulds, pouring them with metal and cooling of castings, indicating the possibilities for an economic re-use of waste materials formed during practical application of this technology. The results were compared with the results obtained on the sands with organic binders. Studies were carried out under the project POIG.01.01.02-00-015/09 "Advanced materials and technologies."
Słowa kluczowe
PL innowacyjny materiał odlewniczy   innowacyjna technologia odlewnicza   spoiwo nieorganiczne   właściwości technologiczne   ekologia   odpad porekultywacyjny  
EN innovative foundry materials   innovative foundry technologies   modified inorganic binder   technological properties   ecology   post reclamation waste management  
Wydawca Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
Czasopismo Archives of Foundry Engineering
Rocznik 2013
Tom Vol. 13, iss. 3
Strony 37--42
Opis fizyczny Bibliogr. 12 poz., wykr.
Twórcy
autor Izdebska-Szanda, I.
autor Palma, A.
  • Foundry Research Institute, Zakopiańska 73, 30-418 Krakow, Poland
autor Angrecki, M.
  • Foundry Research Institute, Zakopiańska 73, 30-418 Krakow, Poland
autor Żmudzińska, M.
  • Foundry Research Institute, Zakopiańska 73, 30-418 Krakow, Poland
Bibliografia
[1] Baliński, A. (2009). About structure of hydrated sodium silicate as a binder of moulding sands. Cracow: Foundry Research Institute.
[2] Stechman, M., Różycka, D. & Baliński, A. (2003). Modification of aqueous sodium silicate solutions with morphoactive agents. Polish Journal of Chemical Technology. 5(3), 47.
[3] Jelinek, P. & Skuta, R. (2003). Modified sodium silicates – a new alternative for inorganic foundry binders. Materials Enginering. 10(3), 283.
[4] Izdebska-Szanda, I. (2009). Moulding sand with silicate binder characterized by beneficial technological and ecological properties. Unpublished doctoral dissertation, Faculty of Mechanical Engineering and Management, Poznań University of Technology, Poznań.
[5] Vasková, I. & Bobok, L. (2002). Some knowledge of the water glass modification by the phosphate compounds. Acta Metallurgica Slovaca. 8(2), 161-167.
[6] Izdebska-Szanda, I., Szanda, M. & Matuszewski, S. (2011). Technological and ecological studies of moulding sands with new inorganic binders for casting of non-ferrous metal alloys. Archives of Foundry Engineering. 11(1), 43-48.
[7] Izdebska-Szanda, I., Baliński, A. (2011) New generation of ecological silicate binders, ELSEVIER, 2011 from Elsevier Ltd. http://dx.doi.org/10.1016/j.proeng.2011.04.146. DOI: 10.1016.
[8] Izdebska-Szanda, I., Baliński, A. & Angrecki, M. (2012). Evaluation of reclamability of moulding sands with new inorganic binders. Archives of Foundry Engineering. 12(2), 35-40.
[9] Izdebska-Szanda, I., Angrecki, M. & Matuszewski, S. (2012). Investigating of the knocking out properties of moulding sands with new inorganic binders used for casting of non-ferrous metal alloys in comparison with the previously used. Archives of Foundry Engineering. 12 (spec. 2), 117-120.
[10] Izdebska-Szanda, I., Żmudzińska M., Faber, J. & Perszewska, K. (2012). Moulding sands with new inorganic binders - ecology assessment in the aspect of work environment. Archives of Foundry Engineering. 12(3), 115-120.
[11] Regulation of the Minister of Labour and Social Policy of 16 June 2009 - Journal of Laws No. 105, item. 873.
[12] Regulation of the Minister of Labour and Social Policy of 29 July 2010 - Journal of Laws No. 141, item. 950.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-2a37e388-123c-4aee-9be5-2720cbdec50c
Identyfikatory