Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-29da27a6-eda3-457a-9734-d6483a9a6851

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

High Temperature Oxidation Process of P91 Steel in CO2 Atmosphere Containing SO2

Autorzy Kominko, H.  Jaroń, A. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN In order to improve the efficiency of power generation system and reduce CO2emissions power plants work at high temperature and pressure. Under such conditions modified steel 9Cr, which fulfils the requirements concerning creep resistance, isused. However, Cr2O3formed on the steel does not protect the construction material in the atmosphere which contains CO2and SO2. The aim of the experiment was to study the behaviour of P91 steel in CO2atmosphere with the addition of 1% and 5 vol.% of SO2at different temperatures (700, 800 and 900°C). It was concluded that the corrosion rate of P91 steel is increasing with a rise in temperature. Scales formed in CO2atmosphere at 900°C contain a mixture of iron oxides in the outer layer and chromium-iron spinel in the inner layer. The FeS and Ni were found in the inner zone of scales formed in SO2atmosphere.
Słowa kluczowe
EN CO2   scale   SO2   P91 steel   high temperature oxidation  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2019
Tom Vol. 64, iss. 4
Strony 1597--1602
Opis fizyczny Bibliogr. 21 poz., fot., rys., tab.
Twórcy
autor Kominko, H.
autor Jaroń, A.
  • Cracow University of Technology, Faculty of Chemical Engineering and Technology, 24 Warszawska Street, 31-155, Cracow, Poland
Bibliografia
[1] C. P. O’Hagan, B. J. O’Brien, S. B. Leen, R.F.D. Monaghan, Corros. Sci. 109, 101-114 (2016).
[2] C. Mobbs, Guidelines/guidance by source category: Part III of Annex C, Victoria, Australia (2006).
[3] J. Ehlers, D. J. Young, E. J. Smaardijk, A. K. Tyagi, H. J. Penkalla, L. Singheiser, W. J. Quadakkers, Corros. Sci. 48, 3428-3454 (2006).
[4] C. Pandey, A. Giri, M. M. Mahapatha, Materials Sciences & Engineering A 664, 58-74 (2016).
[5] T. Olszewski, Tag der mündlichen Prüfung: 15.08.2012.
[6] W. Schulz, M. Nofz, M. Feigl, I. Dorfel, R. Saliwan Neumann, A. Kranzmann, Corros. Sci. 68, 44-50 (2013).
[7] M. Homa, Instytut Odlewnictwa, Kraków 48, 4, 19-41 (2008).
[8] Y. Xiang, M. Xu, Y.-S. Choi, Corrosion Engineering, Science and Technology 52 (7), 485-509 (2017).
[9] A. Radziszewska, A. Kranzmann, I. Dörfel, M. Mosquera Feijoo, M. Solecka, Arch. Metall. Mater. 61, 1607-1612 (2016).
[10] Z. Grzesik, A. Poczekajło, A. Kaczmarska, S. Mrowec, Ochronna przed korozją 54 (6), 341-343 (2011).
[11] Z. Żurek, A. Jaroń, M. Homa, Oxid. Me. 76, 273-285 (2011).
[12] Z. Żurek, J. Gilewicz-Wolter, A. Jaroń, M. Homa, Ochronna przed korozją 54 (6) 330-332 (2011).
[13] Z. Żurek, J. Gilewicz-Wolter, M. Hetmańczyk, J. Dudała, Inżynieria materiałowa, 1 (138), Styczeń-Luty (2004).
[14] Z. Żurek, J. Gilewicz-Wolter, M. Hetmańczyk, J. Dudała, A. Stawiarski, Oxid. Met. 64 (5/6), 379-395 (2005).
[15] Y. Hua, R. Barker, A. Neville, Corrosion 71 (5), 667-683 (2015).
[16] K. Makowska, L. Piotrowski, Z. L. Kowalewski, J. Nondestruct. Eval. 36 (43), 10 (2017).
[17] M. Thirupathy, S. Z. Mazharuddin, S. Biswas, Int. J. Chem. Tech. Res. 7 (2), (2014).
[18] ThyssenKrupp Materials International. Material data sheet P91/T91 (2011).
[19] A. Alviz-Meza, J. A. Sanabria-Cala, V. Kafarov, D. Y. Pena-Ballesteros, Chemical Engineering Transactions 70, 1069-1074 (2018).
[20] L. L. Shreir, R. A. Jarman, G. T. Burstein, Corrosion 1, Metal/Environment reactions. Butterworth-Heinemann 2000.
[21] P. Huczkowski, T. Olszewski, M. Schiek, B. Lutz, G. R. Holcomb, V. Shemet, W. Nowak, G. H. Meier, L. Singheiser, W. J. Quadakkers, Materials and Corrosion 65 (2), 121-130 (2014).
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-29da27a6-eda3-457a-9734-d6483a9a6851
Identyfikatory
DOI 10.24425/amm.2019.130132