Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-27496f88-cf61-4193-ad7b-332940df0e7f

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

Experimental Investigation and Multi-Response Optimization in Turning of Incoloy 800H Superalloy

Autorzy Palanisamy, A.  Selvaraj, T.  Sivasankaran, S. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN This research work is focused on examining the turning behavior of Incoloy 800H superalloy by varying important cutting parameters. Incoloy 800H is an Iron-Nickel-Chromium based superalloy; it can withstand high temperature (810°C), high oxidization and corrosion resistance. But, it is difficult to turn in conventional machines and hence the present work was carried out and investigated. Experiments were conducted based on the standard L27orthogonal array using uncoated tungsten inserts. The cutting force components, namely, feed force (Fx), thrust force (Fy) and cutting force (Fz); surface roughness (Ra) and specific cutting pressure (SCPR) were measured as responses and optimized using Taguchi-Grey approach. The main effects plots and analysis of mean (ANOM) were performed to check the effect of turning parameters and their significance on responses of cutting forces in all the direction (FX, FY, FZ), the surface roughness (Ra) and specific cutting pressure (SCPR). The tool wear and machined surfaces were also investigated using white light interferometer and SEM.
Słowa kluczowe
EN superalloy   microstructure   Taguchi-Grey approach   mathematical models  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2018
Tom Vol. 63, iss. 4
Strony 1683--1691
Opis fizyczny Bibliogr. 31 poz., fot., rys., tab.
Twórcy
autor Palanisamy, A.
  • National Institute of Technology, Department of Production Engineering, Tiruchirappalli - 620 015, Tamilnadu, India
autor Selvaraj, T.
  • National Institute of Technology, Department of Production Engineering, Tiruchirappalli - 620 015, Tamilnadu, India
autor Sivasankaran, S.
Bibliografia
[1] E. O. Ezugwu, Int. J. Adv. Manuf. Technol. 45 (12-13), 1353-1367 (2005).
[2] W. Ren, R. Swindeman, J Press Vess-T Asme. 136 (5), 054001-0540012 (2014).
[3] K. Venkatesan, R. Ramanujam, P. Kuppan, Opt. Laser. Technol, 78, 10-18 (2016).
[4] D. Ulutan, T. Ozel, Int. J. Mach. Tool. Manu, 51 (3), 250-280 (2011).
[5] B. Davoodi, B. Eskandari, Measurement 68, 286-294 (2015).
[6] R. Suresh, S. Basavarajappa, G. L. Samuel, Measurement 45 (7), 1872-1884 (2012).
[7] H. Aouici, M. A. Yallese, K. Chaoui, T. Mabrouki, J. F. Rigal, Measurement. 45 (3), 344-353 (2012).
[8] A. S. Kumar, A. R. Durai, T. Sornakumar, J. Mater. Process. Technol. 173 (2), 151-156 (2006).
[9] S. Thamizhmanii, K. Kamarudin, E. A. Rahim, A. Saparudin, S. Hassan, Proceedings of the World Congress on Engineering 2 (2007).
[10] M. Sarıkaya, A. Güllü, Journal of Cleaner Production 91, 347-357 (2015).
[11] D. Singh, P. V. Rao, Int. J. Adv. Manuf. Tech. 32 (11-12), 1115-1124 (2007).
[12] H. Ding, Y. C. Shin, Mach. Sci. Technol. 17 (2), 246-269 (2013).
[13] A. K. Sahoo, B. Sahoo, Measurement. 45 (8), 2153-2165 (2012).
[14] M. Sadílek, J. Dubský, Z. Sadílková, Z. Poruba, Perspectives in Science 7, 357-363 (2016).
[15] D. G. Thakur, B. Ramamoorthy, L. Vijayaraghavan, Mater. Design 30 (5), 1718-1725 (2009).
[16] S. Pervaiz, A. Rashid, I. Deiab, M. Nicolescu, Mater. Manuf. Process. 29 (3), 219-252 (2014).
[17] C. H. Che Haron, A. Ginting, H. Arshad, J. Mater. Process. Technol. 185, 77-82 (2007).
[18] J. G. Lima, R. F. Avila, A. M. Abrao, M. Faustino, J. Paulo Davim, J. Mater. Process. Tech. 169 (3), 388-395 (2005).
[19] D. K. Das, A. K. Sahoo, R. Das, B. C. Routara, Proc. Mat. Sci. 6, 1351-1358 (2014).
[20] W. L. Liu, W. T. Chien, M. H. Jiang, W. J. Chen, J. Alloys Compd. 495, 97-103 (2010).
[21] A. Palanisamy, T. Selvaraja and S. Sivasankaran, J. Mech. Sci. Technol. 31 (9), 4159-4165 (2017).
[22] A. Palanisamy, T. Selvaraj, S. Sivasankaran, Mater. Manuf. Process (2018), DOI:10.1080/10426914.2018.1424910 (In press).
[23] H. S. Jailani, A. Rajadurai, B. Mohan, A. S. Kumar, T. Sornakumar, Int. J. Adv. Manuf. Technol. 45, 362-369 (2009).
[24] R. Suresh, S. Basavarajappa, V. N. Gaitonde, G. L. Samuel, Int. J. Refract. Met. H. 33, 75-86 (2012).
[25] J. Deng, Introduction to Grey Theory, Journal of Grey Systems 1 (1), 1-24 (1989).
[26] P. Senthil, T. Selvaraj, K. Sivaprasad, Int. J. Adv. Manuf. Technol. 67 (5-8), 1589-1596 (2013).
[27] S. R. Das, D. Dhupal, A. Kumar, Measurement. 62, 108-126 (2015).
[28] A. Pal, S. K. Choudhury, S. Chinchanikar, Proc. Mat. Sci. 6, 80-91 (2014).
[29] Z. Z. Julie, C. C. Joseph, E. Daniel Kirby, J. Mater. Process. Technol. 184, 233-239 (2007).
[30] L. K. Pan, C. C. Wang, S. L. Wei, H. F. Sher, J. Mater. Process. Technol, 182, 107-116 (2007).
[31] D. Palanisamy, P. Senthil, V. Senthilkumar, Arch. Civ. Mech. Eng. 16 (1), 53-63 (2016).
Uwagi
PL Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-27496f88-cf61-4193-ad7b-332940df0e7f
Identyfikatory
DOI 10.24425/amm.2018.125093