Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Surface characterization of the raw and cooked bovine cortical metatarsal bone

Treść / Zawartość
Warianty tytułu
Języki publikacji
The purpose of this study was to quantify the elastic properties and evaluate microscopical features of raw and boiled metatarsal bovine bone. Methods: The elastic modulus, hardness and microscopic surface of raw and cooked bovine metatarsal bone have been investigated using nanoindentation, SEM/EDX and Panasis microscope. Results: Regarding raw bovine bone, the average elastic modulus was 30.515 ± 6,769 GPa, while the average hardness was 0.5683 ± 0.211 GPa. When it comes to boiled bone corresponding values were 22.298 ± 7.0303 GPa and 0.408 ± 0.199 GPa, respectively. The values for investigated parameters were significantly higher ( p < 0.05) in raw bone specimens. Elastic modulus significantly correlated with hardness ( p < 0.05). EDX analysis revealed significant decrease in wt% of oxygen in boiled samples ( p < 0.05) No significant differences could be observed in SEM images particularly when analysing in smaller magnifications. Using higher magnification, additional branching of the existing voids as well as discrete reorganization and smoother edges of nutrient canals could be observed. The surface of boiled specimens was without the presence of crusts and layering, and no microscopical evidence of structural damage could be observed. Conclusions: This study provides detailed analysis of hardness, elastic modulus of raw and cooked bovine bone and their relation and changes during exposure to temperature. These results of elastic moduli and hardness could be comparable to similar studies of bovine and human bone tissue, but the careful analysis of experimental design, type of the bone as well as limitations of the employed techniques must be carried out before interpolation of the results to other theoretical, clinical, biomaterial and archeological studies.
Opis fizyczny
Bibliogr. 29 poz., rys., wykr.
  • 1 University of Novi Sad, Faculty of Medicine, Department of Dentistry Dental Clinic of Vojvodina, Novi Sad, Serbia
  • University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia
  • University of Belgrade, Faculty of Dentistry, Belgrade, Serbia
  • University of Belgrade, Faculty of Philosophy, Belgrade, Serbia
  • University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia
  • University of Novi Sad, BioSense Institute, Novi Sad, Serbia
  • University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia
  • [1] ALHAIQUE F., Do patterns of bone breakage differ between cooked and uncooked bones? An experimental approach, Anthropozoologica, 1997, 25(26), 49–56.
  • [2] CALLAWAY G., Bone Breakage and the Taphonomy of Cooking: An Actualistic Study, Undergraduate Honors Theses, 2008, Paper 801.
  • [3] CASTILLO R.F., UBELAKER D.H., ACOSTA J.A.L., DE LA FUENTE G.A.C., Effects of temperature on bone tissue. Histological study of the changes in the bone matrix, Forensic Sci. Int., 2013, 226, 33–37.
  • [4] CHOYKE A., The Bone Tool Manufacturing Continuum, Anthropozoologia, 25–26, 1997, 65–72.
  • [5] CURREY JD., Tensile yield in compact bone is determined by strain, post-yield behavior by mineral content, J. Biomech., 2004, 37, 549–56.
  • [6] DYSON S.J., Textbook of Veterinary Diagnostic Radiology (Seventh Edition), 2018.
  • [7] ERDALKIRAN M., Neolithic bone spoons from Barcin Höyük, Tüba-Ar, 2015, 18, 25–36.
  • [8] FAN Z., RHO J.-Y., Effects of viscoelasticity and time-dependent plasticity on nanoindentation measurements of human cortical bone, J. Biomed. Mater. Res., 2003, A 67, 208–14.
  • [9] HO BA THO M.-C., ASHMAN R.B., DARMARA R., MORUCCI J., Assesment of the elastic properties of human tibial cortical bone by ultrasonic measurements, [in:] Van der Perre G., Lowet G., Borgwardt Christensen A. (Eds.), In Vivo Assessment of Bone Quality by Vibration and Wave Propagation Techniques. Part I. Leuven, Durham, 1991, 45–56.
  • [10] JARAMILLO-ISAZA S., MAZERAN P., EL-KIRAT K., HO BA THO M., Effects of bone density in the time-dependent mechanical properties of human cortical bone by nanoindentation, Computer Methods in Biomechanics and Biomedical Engineering, 2014, 17 (Suppl. 1), 34–35.
  • [11] LIN Y., XU S., AFM analysis of the lacunar-canalicular network in demineralized compact bone, J. Microsc., 2011, 241(3), 291–302.
  • [12] MAMEDE A.P., GONÇALVES D.M., MARQUES P.M., DE CARVALHO L.B.A.E., Burned bones tell their own stories: A review of methodological approaches to assess heatinduced diagenesis, Applied Spectroscopy Reviews, DOI: 2017, 10.1080/05704928.2017.1400442
  • [13] MANILAY Z., NOVITSKAYA E., SADOVNIKOV E., MCKITTRICK J., A comparative study of young and mature bovine cortical bone, Acta Biomater., 2013, 9(2), 5280–8.
  • [14] MAZURKIEWICZ A., The effect of trabecular bone storage method on its elastic properties, Acta Bioeng Biomech, 2018, 20(1), 21–27.
  • [15] NANDRIS J., Bos Primigenius and the Bone Spoon, Bulletin of the Institute of Archaeology, 1972, 10, 63–82.
  • [16] NIKODEM A., ŚCIGAŁA K., Impact of some external factors on the values of mechanical parameters determined in tests on bone tissue, Acta Bioeng. Biomech., 2010, 12 (3), 85–93
  • [17] NOVITSKAYA E., CHEN P., HAMED E., JUN L., LUBARDA V., JASIUK I., MCKITTRICK J., Recent advances on the measurement and calculation of the elastic moduli of cortical and trabecular bone: A review. Theoretical and Applied Mechanics, 2011, 38(3), 209–297.
  • [18] OLIVER W.C., PHARR G.M., Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology, J. Mater. Res., 2004, 19, 3–20.
  • [19] OLSEN S.L., Analytical approaches to the manufacture and use of bone artifacts in prehistory, Ph.D. Thesis in Prehistory, Institute of Archaeology, University of London, 1984.
  • [20] OLSZTA M.J., CHENG X., JEE S.S., KUMAR R., KIM Y.-Y., KAUFMAN J. et al., Bone structure and formation: a new perspective, Mater Sci. Eng. R, 2007, 58, 77–116.
  • [21] OSTROWSKA A., KUROPKA P., BĘDZIŃSKI R., The influence of choissing chemical methods to bone structures properties, Engineering of Biomaterials, 2004, 38–42, 194–197,
  • [22] PAL S., Mechanical Properties of Biological Materials, [in:] Design of Artificial Human Joints & Organs, Springer, Boston, MA, 2014.
  • [23] SASAKI N., IKAWA T., FUKUDA A., Orientation of mineral in bovine bone and the anisotropic mechanical properties of plexiform bone, J. Biomech., 1991, 24, 57–61.
  • [24] SOLARI A., OLIVERA D., GORDILLO I., BOSCH P., FETTER G., LARA V.H., NOVELO O., Cooked Bones? Method and Practice for Identifying Bones Treated at Low Temperature, International Journal of Osteoarchaeology, 2015, 25, 426–440.
  • [25] SPETH J.D., Boiling vs. Baking and Roasting: A Taphonomic Approach to the Recognition of Cooking Techniques in Small Mammals, [in:] P. Rowley-Conway (Ed.), Animal Bones, Human Callaway 36 Societies, Oxbow Books, Oxford, Great Britain, 2000.
  • [26] THURNER P.J., Atomic force microscopy and indentation force measurement of bone, Wiley Interdisciplinary reviews – Nanomedicine and Nanobiotechnology, 2009, 1, 624–649.
  • [27] TURNER C.H., CHANDRAN A., PIDAPARTI R.M., The anisotropy of osteonal bone and its ultrastructural implications, Bone, 1995, 7, 85–9.
  • [28] WANG X.J., CHEN X.B., HODGSON P.D., WEN C.E., Elastic modulus and hardness of cortical and trabecular bovine bone measured by nanoindentation, Trans. Nonferrous Met. Soc. China, 2006, 16, 744–748.
  • [29] ZIMMERMANN E.A., RITCHIE R.O., Bone as a Structural Material, Adv. Healthc. Mater., 2015, 24, 4(9), 1287–304.
This paper was financed through H2020 ERC project BIRTH No. 640557 and partly financed by Provincial Secretariat for Higher Education and Scientific Research project no. 142-451-2508/2017-02.
Typ dokumentu
Identyfikator YADDA
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.