Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first last
cannonical link button

http://yadda.icm.edu.pl:80/baztech/element/bwmeta1.element.baztech-06e38f4e-a9a8-43d8-80c1-c86354e64e6e

Czasopismo

Archives of Metallurgy and Materials

Tytuł artykułu

Production of Melt-Spun Al-20Si-5Fe Alloy and Boron Carbide (B4C) Composite Material

Autorzy Kilicaslan, M. F.  Uzun, A.  Karakose, E. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN In this study, metal matrix composite materials containing melt-spun Al-20Si-5Fe alloys and boron carbide was produced by high energy ball milling and then hot pressing at 200 MPa pressure and 450°C. Mechanical and microstructural characterizations were performed by using an optical microscopy, X-Ray diffractometer, and dynamic microhardness tester. It was observed that boron carbide particles were homogenously distributed in the microstructure and values of microhardness and elastic modules were averagely 830 MPa and 42 GPa, respectively.
Słowa kluczowe
EN metal matrix composite   rapid solidification   Al-Si alloys  
Wydawca Polish Academy of Sciences, Committee of Metallurgy, Institute of Metallurgy and Materials Science
Czasopismo Archives of Metallurgy and Materials
Rocznik 2018
Tom Vol. 63, iss. 2
Strony 597--600
Opis fizyczny Bibliogr. 13 poz., rys.
Twórcy
autor Kilicaslan, M. F.
autor Uzun, A.
  • Kastamonu University, Department of Mechanical Engineering, Kastamonu, Turkey
autor Karakose, E.
  • Erciyes University, Kayseri Vocational School, Department of Automotive Technology, 38039 Kayseri, Turkey
Bibliografia
[1] L. G. Hou, C. Cui, J. S. Zhang, Mater. Sci. Eng. A 527, 6400-6412 (2010).
[2] M. Rajabi, A. Simchi, M. Vahidi, P. Davami, J. Alloy Compd. 466, 111-118 (2008).
[3] Q. Li, T. Xia, Y. Lan, P. Li, L. Fan, Mater. Sci. Eng. A 588, 97-102 (2013).
[4] D. M. Goudar, K. Raju, V. C Srivastava, G. B. Rudrakshi, Mater. Des. 51, 383-390 (2013).
[5] M. F. Kilicaslan, W. R. Lee, T. H. Lee, Y. Sohn, S. J. Hong, Mater. Lett. 71, 164-167 (2012).
[6] D. M. Goudar, G. B. Rudrakshi, V. C. Srivastava, J. Reddy, A. G. Joshi, Int. J. Sci. Eng. Res. 2 (6) (2011).
[7] U. Kolemen, J. Alloy Compd. 425, 429-435 (2006).
[8] O. Sahin, O. Uzun, S.-L. Małgorzata, H. Gocmez, U. Kolemen, J. Eur. Ceram. Soc. 28, 1235-1242 (2008).
[9] W. C. Oliver, G. M. Pharr, J. Mater. Res. 7 (6), 1564-1583 (1992).
[10] M. F. Kilicaslan, O. Uzun, F. Yilmaz, S. Caglar, Metall. Mater. Trans. B 45b, 1865 (2014).
[11] Y. L. Zhou, M. Niinomi, Mater. Trans. 50, 368-372 (2009).
[12] O. Şahin, O. Uzun, U. Kölemen, N. Uçar, Mater. Charac. 59, 427-434 (2008).
[13] O. Uzun, U. Kölemen, S. Çelebi, N. Güçlü, J. Eur. Ceram. Soc. 25, 969-977 (2005).
Uwagi
EN This work was supported by Kastamonu Universitesi Bilimsel Arastirma Projeleri Yonetimi Koordinatorlugu [KÜBAP-05 / 2014-01].
PL Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-06e38f4e-a9a8-43d8-80c1-c86354e64e6e
Identyfikatory
DOI 10.24425/122382