Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button


Zeszyty Naukowe. Transport / Politechnika Śląska

Tytuł artykułu

Determining the torque loading of the cycloid gear

Autorzy Pawelski, Z.  Zdziennicki, Z. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
EN Based on experimental investigations, a very close correlation was established between the torque loading of the cycloid gear and the laser sensor’s indications measuring the displacement of the gear body. The method is given and the relationship between the registered signal of the torque loading of the gear and the registered laser sensor signal is determined. The practical application of this property in the industrial diagnostics of cycloidal gears is discussed. Spectral analysis of the fast Fourier transform (FFT) signal ripple from a laser sensor is made. These results are compared with the results of the analysis carried out on the ripples of the torques and rotational speeds of the cycloid gear. This comparison shows that the spectral FFT analysis of the ripples of the laser sensor signal is a useful tool in the diagnostics of cycloidal gears.
Słowa kluczowe
PL przekładnia cykloidalna   moment obciążenia   sygnał laserowy   analiza FFT  
EN cycloidal gear   load torque   laser signal   FFT analysis  
Wydawca Wydawnictwo Politechniki Śląskiej
Czasopismo Zeszyty Naukowe. Transport / Politechnika Śląska
Rocznik 2018
Tom z. 101
Strony 131--140
Opis fizyczny Bibliogr. 10 poz.
autor Pawelski, Z.
  • Lodz University of Technology, Department of Vehicles and Fundamentals of Machine Design, Stefanowskiego 1/15, 90-537 Lodz, Poland,
autor Zdziennicki, Z.
  • Lodz University of Technology, Department of Vehicles and Fundamentals of Machine Design, Stefanowskiego 1/15, 90-537 Lodz, Poland,
1. Bao J., W. He. 2015. “Parametric Design and Efficiency Analysis of the Output-pin-wheel Cycloid Transmission”. International Journal of Control and Automation 8(8): 349-362.
2. Cochran V., T. Bobak. 2008. A Methodology for Identifying Defective Cycloidal Reduction Components Using Vibration Analysis and Techniques. AGMA Technical Paper 08FTM02.
3. Gaidys R., D. Zizys, R. Dauksevicius, V. Ostaševičius. 2013. “Segmentation of piezoelectric layers based on the numerical study of normal strain distributions in bimorph cantilevers vibrating in the second transverse mode”. Mechanika 4: 451-458.
4. Lai T., W. Hsieh, G. Chen. 2007. “Geometrical Design of Roller Drives with Two-tooth Difference”. Journal of the Chinese Society of Mechanical Engineers 28(6): 641-648.
5. Naginevicius V., V. Ostasevicius, A. Bubulis, A. Palevicius. 2015. “Vibration assisted spring loaded micro spray system for biomedical application”. Mechanika 4: 285-289.
6. Pawelski Z., Z. Zdziennicki. 2018. “FFT Analysis of Torque and Speed Ripples as a Diagnostic Tool for a Cycloidal Gear”. Journal of Measurements in Engineering (in press).
7. Plugin A., L. Trykoz, O. Herasymenko, A. Pluhin, V. Konev. 2018. “Independent diagnostic computer systems with the ability to restore operational characteristics of construction facilities”. Diagnostyka 19(2): 11-21. DOI: 10.29354/diag/83009.
8. Warda B. 2006. “Test Rig for Lifetime Testing of Meshing of the Cyclo Gear”. Tribologia 6: 131-140.
9. Yang B., Y. Liu, G. Ye. 2012. “Research of ArtemiS in a Ring-plate Cycloid Reducer”. Journal of Software 7(12): 2671-2677.
10. Zah M., D. Lates, V. Csibi. 2012. “Thermal Calculation for Planetary Cycloidal Gears with Bolts. Acta Universitatis Sapientiae Electrical and Mechanical Engineering 4: 103-110.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-05881822-b956-4334-b677-222c06af2f14
DOI 10.20858/sjsutst.2018.101.12